Cisco 800 Series ISDN Routers

Cisco 800 Series of Secure Routers are ideal for providing secure Internet and corporate network connectivity to small remote offices and teleworkers. The Cisco 800 Series of Secure Routers provide a wide range of rich integrated security s

Cisco 1600 Series Routers

This product has reached end-of-sale or end-of-life status; it cannot be ordered and may no longer be supported. Refer to Cisco 1700 Series for replacement products

Cisco 1700 Series Routers

Cisco 1700 Series modular access routers are ideal for enterprise small branch offices and small and medium-sized businesses that need secure access to business applications, network resources, and Internet services for all users. The Cisco

Cisco 2500 Series Routers

With the exception of the Cisco 2509 and 2511 models, all other Cisco 2500 models have reached end-of-sale or end-of-life status and cannot be ordered and may no longer be supported. Refer to Cisco 2600 Series for replacements.

Cisco 2600 Series Routers

The Cisco 2600 Series is an award-winning family of modular multiservice access routers, providing flexible LAN and WAN configurations, multiple security options and a range of high performance processors. This range of features makes the C

Cisco 3600 Series Routers

The Cisco 3600 Series is a family of modular, multiservice access platforms for medium and large-sized offices and smaller Internet Service Providers. With over 70 modular interface options, the Cisco 3600 family provides solutions for data

Cisco 1-pt 10BT, 2WIC Slots Network Module (NM-1E2W)

- occupies one slot in the router - 10MB Ethernet port (AUI/RJ45) - either AUI or RJ45 may be used not both. - 2 WIC slots for optional WIC modules - WIC cards fit "card within a card" into ethernet module - WIC cards (ISDN BRI, Serial, etc

Cisco 1-pt 10/100, 2WIC Slots Network Module (NM-1FE2W)

- Occupies one slot in the router - Supports all available WICs and VWICs (see below for a complete list) - Greater Network Module Slot efficiency than currently available. - Support for up to 8Mb throughput on a WIC interface - 10/100 auto

Cisco 1-pt 10BT Network Module (NM-1E)

Adds a 10 Base-T rj45 ethernet interface to any 2600 or 3600 series router with an open Network Modular slot.

Cisco 1-pt 10/100 Network Module (NM-1FE-TX)

The 1 port fast ethernet module has one (1) RJ45 connector and one (1) 40-pin media independent interface (MII). Only one of these connectors can be active at a time. The RJ45 port connects ot two-pair category 5 UTP cabling following the 1

Cisco 1-pt 10-B-T WAN card (WIC-1ENET)

A Solution for Adding Broadband or Perimeter LAN Connectivity to Your Network The Cisco Single-Port Ethernet WAN Interface Card (WIC-1ENET) offers customers using a Cisco 1700 series router the option of an additional Ethernet port for enab

Cisco 1-pt T1/fr T1 DSU/CSU WAN card (WIC-1DSU-T1)

T1 or fractional T1 network interface N X 64 kbps or N X 56 kbps, nonchannelized data rates (N = 1 to 24) Standards based, including ANSI T1.403 and AT&T Publication 62411 Full management features Configuration--Capability for remote config

Cisco 2-pt 10BT, 2WIC Slots Network Module (NM-2E2W)

- Occupies one slot in the router - 2 10MB Ethernet port (AUI/RJ45) - Either AUI or RJ45 may be used for each Ethernet connection not both. - 2 WIC slots for optional WIC modules - WIC cards fit "card within a card" into the ethernet module

Cisco 2-pt 10/100, 2WIC Slots Network Module (NM-2FE2W)

- occupies one slot in the router - Two autosensing 10/100 Ethernet Ports. - 2 WIC slots for optional WIC modules - WIC cards fit "card within a card" into ethernet module - WIC cards (ISDN BRI, Serial, etc.)not included

Cisco 2-pt Async/Sync Serial Module (WIC-2A/S)

- Two async/synchronous serial ports - Async/sync serial mode supports up to 115.2Kbps (external modem required -- not provided by Cisco) - WAN Interface Cards are stocked separately for easy inventory management - Product designed for eas

2-pt FXO voice module (VIC - 2FXO)

- Marketing Information: The two-port FXO voice/fax interface card for Cisco voice/fax network modules is used to connect to PBX or key system, and to provide off-premise connections. This voice interface card works with existing phone and

2-pt FXS voice module (VIC - 2FXS)

The FXS (Foreign Exchange Station) interface is a connector that allows connection for normal residential phones, fax machines, keysets and PBXs, and provides ring voltage, dial tone etc. This will be used where phones are connecting direct

Cisco 2WAN Slots Network Module (NM-2W)

- Supported on complete range of Cisco 2600 and 3600 series Multiservice platforms. - Increase WIC density in Cisco 2600 series. - Support for up to 8Mb throughput on a WIC interface. - Requires IOS Version 12.0.7 (XK). - No Ethernet Port,

Cisco 4pt Ethernet Network Module (NM-4E)

4 port Ethernet Network Modules: -Use one (1) router slot in the Cisco 3600 or 2600 series router -Provide 4 Ports with 4 RJ45 and 1 AUI Connectors -Port 0 - uses an AUI or RJ45, ports 1,2 and 3 are RJ45

Cisco 4-pt Serial Network Module (NM-4T)

4 port Serial Network Modules: -Use one (1) router slot in the Cisco 3600 series router -Provide 4 Ports with Cisco proprietary DB60 Connectors -Max Speed: 8MBPS on port 0, 4MBPS each on ports 0 and 2, 2MBPS on all 4 ports simultaneously

Cisco VWIC-1MFT-E1 1-pt RJ-48 multiflex E1 module

The new Multiflex VWICs combine WAN Interface Card (WIC) and Voice Interface Card (VIC) functionality to provide unparalleled flexibility, versatility and investment protection from its many uses. - Supporting up to T1 and E1 rates with i

Cisco VWIC-1MFT-G703 1-pt RJ-48 multiflex G703 module

Voice interface card - plug-in module - Expansion Slot - E1 - 2.048 Mbps

Cisco VWIC-2MFT-E1 2-pt RJ-48 multiflax E1 module

Cisco WIC-1ADSL 1-pt ADSL WAN card

Delivers up to 8 Mbps downstream and 860 kbps upstream, depending on line length and conditions. IP Quality-of-Service (QoS) features. Per-VC queuing supported in Cisco IOS Release 12.2(4)XL. Interoperates with the Cisco 6000 Series Digital

Cisco WIC-1B-U= 1-pt ISDN WAN card

- ISDN BRI with U interface (NT-1 included) - will not work in 1603/1604 routers (unsupported configuration)

Cisco WIC-1T+ 1-pt Serial WAN, bulk,SS connector

- One synchronous serial port (can also be used for async operation) - Synchronous serial mode supports X.25, Frame Relay, SMDS, Switched 56 up to T1/E1 speed - Asynchronous serial mode supports up to 115.2Kbps (external modem required -- n

Cisco 7206VXR Routher